Security

Reply
Frequent Contributor I
Posts: 96
Registered: ‎01-27-2015

Guest not access to captive portal

I installed clearpass CPPM and guest module and I configured everything by after I try to connect SSID, it redirect to captive portal but there's alert that "the page contains too many server redirects"

 

I configure redirect page as http://10.10.1.93/guest/guest_register.php

and has firewall policy to allow captive portal

 

Capture.JPGCapture.JPG

 

Capture.JPG

Guru Elite
Posts: 8,447
Registered: ‎09-08-2010

Re: Guest not access to captive portal

Please post the output of:

show rights <captive-portal-role>

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Frequent Contributor I
Posts: 96
Registered: ‎01-27-2015

Re: Guest not access to captive portal

Derived Role = 'G-guest-logon'
Up BW:No Limit Down BW:No Limit
L2TP Pool = default-l2tp-pool
PPTP Pool = default-pptp-pool
Periodic reauthentication: Disabled
DPI Classification: Enabled
ACL Number = 83/0
Max Sessions = 65535

Captive Portal profile = G-cp_prof

Application Exception List
--------------------------
Name Type
---- ----

Application BW-Contract List
----------------------------
Name Type BW Contract Id Direction
---- ---- ----------- -- ---------

access-list List
----------------
Position Name Type Location
-------- ---- ---- --------
1 global-sacl session
2 apprf-G-guest-logon-sacl session
3 captiveportal session
4 logon-control session

global-sacl
-----------
Priority Source Destination Service Application Action TimeRange Log Expired Queue TOS 8021P Blacklist Mirror DisScan ClassifyMedia IPv4/6 Contract
-------- ------ ----------- ------- ----------- ------ --------- --- ------- ----- --- ----- --------- ------ ------- ------------- ------ --------
apprf-G-guest-logon-sacl
------------------------
Priority Source Destination Service Application Action TimeRange Log Expired Queue TOS 8021P Blacklist Mirror DisScan ClassifyMedia IPv4/6 Contract
-------- ------ ----------- ------- ----------- ------ --------- --- ------- ----- --- ----- --------- ------ ------- ------------- ------ --------
captiveportal
-------------
Priority Source Destination Service Application Action TimeRange Log Expired Queue TOS 8021P Blacklist Mirror DisScan ClassifyMedia IPv4/6 Contract
-------- ------ ----------- ------- ----------- ------ --------- --- ------- ----- --- ----- --------- ------ ------- ------------- ------ --------
1 user controller svc-https dst-nat 8081 Low 4
2 user any svc-http dst-nat 8080 Low 4
3 user any svc-https dst-nat 8081 Low 4
4 user any svc-http-proxy1 dst-nat 8088 Low 4
5 user any svc-http-proxy2 dst-nat 8088 Low 4
6 user any svc-http-proxy3 dst-nat 8088 Low 4
logon-control
-------------
Priority Source Destination Service Application Action TimeRange Log Expired Queue TOS 8021P Blacklist Mirror DisScan ClassifyMedia IPv4/6 Contract
-------- ------ ----------- ------- ----------- ------ --------- --- ------- ----- --- ----- --------- ------ ------- ------------- ------ --------
1 user any udp 68 deny Low 4
2 any any svc-icmp permit Low 4
3 any any svc-dns permit Low 4
4 any any svc-dhcp permit Low 4
5 any any svc-natt permit Low 4
6 any 169.254.0.0 255.255.0.0 any deny Low 4
7 any 240.0.0.0 240.0.0.0 any deny Low 4

Expired Policies (due to time constraints) = 0

 

 

Thank you for fast reply

Guru Elite
Posts: 8,447
Registered: ‎09-08-2010

Re: Guest not access to captive portal

[ Edited ]

You need to allow your ClearPass servers. Go to Configuration > Stateful Firewall > Destinations and add a destination called CLEARPASS. Add in your ClearPass IPs.

 

Now go to your captive portal profile (under L3 authentication), find the Whitelist option and select the netdestination you just created and add it.


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: