Security

Reply

HP ProCurve 802.1X with ClearPass

Hi everyone,

 

Working with a customer who wants to do 802.1X on HP ProCurve switches to ClearPass. I have guides explaining the configuration, and I don't have a problem with that. My problem/question is when I enable 802.1X globally on the HP switch, will that affect any existing / new users on that switch? It is a production switch and I don't to cause anybody connectivity issues. After globally enabling it, you can configure it on a port-by-port basis, but just wanted to verify prior to enabling it globally.

 

Thanks.


Michael Haring
ACMP, ACCP, BCNE, CCENT, Palo Alto ACE 7.0
Guru Elite

Re: HP ProCurve 802.1X with ClearPass

It should not send EAPoL start messages until it is enabled on the port.


Tim Cappalli | Aruba Security
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480

Re: HP ProCurve 802.1X with ClearPass

Great, thanks for the help!


Michael Haring
ACMP, ACCP, BCNE, CCENT, Palo Alto ACE 7.0
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: