Security

Reply
Regular Contributor I
Posts: 169
Registered: ‎10-22-2010

High & low Queue, in the policy rules.

Hi,

 

When we write rules in a policy, there is option to stamp dscp and 802.1p values to the packets hitting the rule. There is also an option to set it in high queue or low queue. 

 

what does this high queue and low queue mean? 

 

Regards,

Aruba
Posts: 1,279
Registered: ‎08-29-2007

Re: High & low Queue, in the policy rules.

I don't know where I saw it, but it is something along the lines of when a high queue packet is received, it is immediately processed before other packets that only have a low queue.

 

Good idea for voice traffic and traffic for other mission critical applications.


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
Regular Contributor I
Posts: 169
Registered: ‎10-22-2010

Re: High & low Queue, in the policy rules.

[ Edited ]

Hi, 

 

Thank you for your opinion. 

 

Is there any way this can be tested.

 

How quick a packet is processed if its in the high queue & when its on the low queue. 

 

 

 

Occasional Contributor II
Posts: 27
Registered: ‎12-18-2011

Re: High & low Queue, in the policy rules.

Try to do a session mirroring of the traffic by writing an acl.

Occasional Contributor I
Posts: 6
Registered: ‎03-17-2013

Re: High & low Queue, in the policy rules.

i am aware this is an old post, however i am interested to know if these low and high options are marked to be picked up by QOS at the AP and beyond or it is just used for the wireless part of the "trip"

Aruba
Posts: 1,279
Registered: ‎08-29-2007

Re: High & low Queue, in the policy rules.

it is just on the wireless and the packets are not marked.

 

 


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
Search Airheads
Showing results for 
Search instead for 
Did you mean: