Security

Reply
Frequent Contributor I
Posts: 83
Registered: ‎09-29-2011

How add an ip route in clearpass ?

Hello,

 

i would like to know how add an ip route in clearpass, because i configure 2 interface IP on my Clearpass

Mgmt and Data.

 

Mgmt is use for magament and check AD

Data is use for access to Guest Portal

 

When i configure an IP address on the DATA interface, i could not access on my internal Active Directory by the Mgmt interface.

 

On CLI,  i found this cmd but it doesn't work ... 

 

"add Add the network ip rule

 

Usage:

network ip add <mgmt|data|greN> [-i <id>] <[-s <SrcAddr>] [-d <DestAddr>]> [-g <ViaAddr>]
Where
greN -- Name of the gre tunnel where N corresponds to the gre
tunnel number ranging from 1,2,3...N
-i -- Optional parameter. Id of the network ip rule. If unspecified the
system will auto generate the Id
-s <SrcAddr> -- Optional parameter. The source interface ip address or netmask from
where the network ip rule is specified. The allowed values are -
valid IP Address or Netmask or '0/0'
-d <DestAddr> -- Optional parameter. The destination interface ip address or netamsk
where the network ip rule is specified. The allowed values are -
valid IP Address or Netmask or '0/0'
-g <ViaAddr> -- Optional parameter. The via or gateway ip address through which the
network traffic should flow. The allowed value is valid IP Address"

 

 

Could you to help me ?

MVP
Posts: 4,022
Registered: ‎07-20-2011

Re: How add an ip route in clearpass ?

 

Try this :

network ip add mgmt -d <Active Directory IP Address/Subnet Mask> -g <Gateway IP address>

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Frequent Contributor I
Posts: 83
Registered: ‎09-29-2011

Re: How add an ip route in clearpass ?

it work now ! thanks victorfabian !

Frequent Contributor I
Posts: 66
Registered: ‎05-16-2012

Re: How add an ip route in clearpass ?

Hi,

 

I try this :

#network ip add data -d 192.168.2.1/24 -g 192.168.10.1


ERROR - Failed add route for destination=192.168.2.1/24 via=192.168.10.1

 

What could be the problem?

 

Thanks!

Moderator
Posts: 458
Registered: ‎11-09-2012

Re: How add an ip route in clearpass ?

[ Edited ]

based upon a /24 your IP address and Gateway are in different subnets, but you have used a host address for the destinatation. I'm guessing this is the issue. Also, I guess that the data interface is in the 192.168.10.0 network.

 

 


Best Regards
-d

Snr Tech Marketing Engineer - ClearPass

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
Search Airheads
Showing results for 
Search instead for 
Did you mean: