11-19-2014 12:33 PM
Hello guys and girls,
I was trying to figure out how to check in clearpass how it know it's for example a mobile, or a laptop.
This is because I thought I read somewhere (can't remember where), that I needed to configure on remote switches where AP's are connected to, a ip helper address to point to the clearpass.
Otherwise it would not know if it's a laptop or mobile.
Could someone help me please?
Thanks in advance for your help!
11-19-2014 12:41 PM
Please go to
https://<ip address of clearpass server>/tipshelp/html/en/index.htm#CPPM_UserGuide/Profiling.htm
https://<ip address of clearpass server>/tipshelp/html/en/index.htm#CPPM_UserGuide/EndpointProfiles.html
Also, search for profiler in the online help for a full explanation.
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
11-19-2014 12:42 PM
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
11-20-2014 11:55 PM - edited 11-20-2014 11:56 PM
Please look at a newer TechNote I published on this subject.
Snr Tech Marketing Engineer - ClearPass
-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
11-21-2014 06:54 AM
You can also go to the following in Clearpass:
Configuration > Identity > Endpoints
to see how those devices are currently being classified within the system.