Security

Reply
New Contributor
Posts: 3
Registered: ‎06-08-2015

How to I reset the AP enable password

Hi

Any ideas how i can reset the password on an aruba AP-105. Unfortunately when I connect to the AP via console, am taken straight to CLI and am not asked for the admin:forgetme! username and password.

 

Basically want to change some static routes on the AP so need the enable password unless there is a way of changing static routes on the AP without having to log on to the AP cli

 

many thanks

Guru Elite
Posts: 8,637
Registered: ‎09-08-2010

Re: How to I reset the AP enable password

Is this an Instant AP or campus AP?


Thanks,
Tim

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
New Contributor
Posts: 3
Registered: ‎06-08-2015

Re: How to I reset the AP enable password

It's campus AP. All managed through ARUBA3600 mobility controller

 

Many thanks

Guru Elite
Posts: 21,272
Registered: ‎03-29-2007

Re: How to I reset the AP enable password

There are no routes to change on an Campus AP.  All the routes exist on the controller.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 3
Registered: ‎06-08-2015

Re: How to I reset the AP enable password

I did think as much that the routes exist on the controller but have looked that AP configuration that is pushed outto the controllers and cant seem to find where the routes are actually set. Appreciate direction on where within the controller the routes are configured
Guru Elite
Posts: 8,637
Registered: ‎09-08-2010

Re: How to I reset the AP enable password

Routes can be added using the "ip route" command or under Configuration > IP.


Thanks,
Tim

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: