Security

Reply
Occasional Contributor II

How to check health status of Virtual machines on local network

Hi, we are planning to deploy OnGuard in the network and now it is in testing. Almost we have tested the OnGuard on test environment but our issue is we are unable to do a health check of the virtual machines in the local network but at the same time health check is performed on the host server. At present we are testing this in a wireless environment with Aruba controller and Clearpass OnGuard.

 

Our requirement is all the machines in LAN including virtual machines should meet minimum compliance to connect to the network. How can we achieve this? Can anyone guide me on this? Virtual machines are connected through Bridge or NAT mode of the host adaptor.

 

Thanks,

Yugandhar.

Guru Elite

Re: How to check health status of Virtual machines on local network

Unfortunately, enforcement of VM posture with NAT mode is not possible.


Tim Cappalli | Aruba Security
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II

Re: How to check health status of Virtual machines on local network

Ok, but how to check health status of bridged virtual machines. Please help me on this.

Get Outlook for Android
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: