Security

Reply
Contributor II
Posts: 56
Registered: ‎01-27-2014

How to limit user sessions using Clear pass 6.6.x

 

 

Hi All,

How to limit user sessions using Clear pass 6.6.x as using the below url it does not work that is

 

in the fourth Screenshot of the url  "Database name tipsLogDb" says wrong

 

http://community.arubanetworks.com/t5/AAA-NAC-Guest-Access-BYOD/How-to-limit-simultaneous-active-sessions-from-a-given-user/ta-p/186556

Guru Elite
Posts: 20,578
Registered: ‎03-29-2007

Re: How to limit user sessions using Clear pass 6.6.x

Please use the more up-to-date method here:   http://community.arubanetworks.com/t5/Controller-Based-WLANs/How-to-deny-access-for-authentication-request-based-on-session/ta-p/183304



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor II
Posts: 56
Registered: ‎01-27-2014

Re: How to limit user sessions using Clear pass 6.6.x

Hi Colin,

               Thanks for the response. currently we are using the solution as per the URL posted and we are planning to upgrade  6.6.o or 6.6.1. so when tested to try same on 6.6.0 it fails so i am sure if we upgrade from 6.5.x to 6.6.0 it fail for sure. So trying  to check precise variable or parameter as mentioned to move forward

Guru Elite
Posts: 20,578
Registered: ‎03-29-2007

Re: How to limit user sessions using Clear pass 6.6.x

Are you using the old method, or the new method? The older one should not be used for newer installations.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor II
Posts: 56
Registered: ‎01-27-2014

Re: How to limit user sessions using Clear pass 6.6.x

We are using old method which is deployed already and running fine. Now customer planning to upgrade the clear pass 6.6.x. Once we upgrade i think old procedure will not work as database name does not match "tipsLogDb" in 6.6.0.

 

Is there way to tune the old method to work after upgrading to 6.6.x?

Search Airheads
Showing results for 
Search instead for 
Did you mean: