Security

Reply
Contributor I
Posts: 31
Registered: ‎02-18-2015

How to replace the "Aruba Networks" logo from Guest Manager webUI

I would like to know if it is at all possible to remove the Aruba Networks company logo from the clearpass guest manager webUI.  this is a portal that sponsor operators access after they login to create guest users accounts.  We would like to replace the "Aruba logo" with our company logo.  

 

I have tried to do this by changing the HTML header under the "ClearPass guest skin" plug in. But I have only been able to replace the "ClearPass" guest logo at the center of the page. Not the one on the top left hand corner.  

 

Has anyone done this before?  I guess my end goal would be to be able to customize the "operator webUI" if at all possible (see attached).  Any guidance would be greatly appreciated. 

 

MVP
Posts: 4,271
Registered: ‎07-20-2011

Re: How to replace the "Aruba Networks" logo from Guest Manager webUI

If you make that change the entire Guest Module will look the same way.

 

Here's the instructions:

- First upload the image you want to use as your logo

2015-04-15 15_40_16-Public Files.png

 

- Then add this image as a logoto one of the Custom Skins 1 or 2

2015-04-15 15_41_53-Custom Skin 1 6.5.0-31102 Configuration.png

- Then enable this skin and the entire module will have the new image instead of the Aruba 

2015-04-15 15_42_13-Available Plugins.png

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Aruba Employee
Posts: 37
Registered: ‎09-23-2013

Re: How to replace the "Aruba Networks" logo from Guest Manager webUI

So the default "ClearPass Guest Skin" does not have an editable logo.

 

Victor Fabian is correct in that you can use the "Custom Skin 1" plugins and customize with your own logos.

 

If you are on ClearPass 6.5+, I would also reccomend you look into our new "Galleria Skin," screenshots attached.

 

For more info on Galleria, please see: https://afp.arubanetworks.com/afp/index.php/How-to:_Galleria_Skin

Aruba Employee
Posts: 37
Registered: ‎09-23-2013

Re: How to replace the "Aruba Networks" logo from Guest Manager webUI

So the default "ClearPass Guest Skin" does not have an editable logo.

 

Victor Fabian is correct in that you can use the "Custom Skin 1" plugins and customize with your own logos.

 

If you are on ClearPass 6.5+, I would also reccomend you look into our new "Galleria Skin," screenshots attached.

 

For more info on Galleria, please see: https://afp.arubanetworks.com/afp/index.php/How-to:_Galleria_Skin

Contributor I
Posts: 31
Registered: ‎02-18-2015

Re: How to replace the "Aruba Networks" logo from Guest Manager webUI

thansk for the additional infor hdhal. I will need to play around with the new skin on 6.5.x. 

Contributor I
Posts: 31
Registered: ‎02-18-2015

Re: How to replace the "Aruba Networks" logo from Guest Manager webUI

Thanks for the quick response victorfavian.  I tried your suggestion but I din't like what it did to the entire guest module webUI.  All I wanted to was to change the corner logo while keeping the current skin.  I'll need to play around with this when I have more time.

 

THanks for the guidance!

Contributor I
Posts: 31
Registered: ‎02-18-2015

Re: How to replace the "Aruba Networks" logo from Guest Manager webUI

I finally figured this out.  Thank you Victorfabian for getting me on the righ track.  

 

Ok all I wanted was to customize or rebrand my "sponsor portal" so that users from my company get a page with our company logo and a custom message such as "Acme Sponsor Portal", etc.  Your instructions say to "enable" the "Custom Skin 1/2".  That does the job yes. But it also changes the format of the whole guest admin gui.  That's not exactly what I wanted. I do like the default Aruba format for my admin gui.

 

To make the changes to impact only my sponsor portal or any other portal or weblogin that references the custom skin 1/2.  All you have to do is not enable that skin plugin see below steps.  

 

(1) - From “Guest >> Administration >> Plugin Manager >> Custom Skin 1”
(2) - Select Configuration - form here you can change the mode to “Advanced” and this will let you change the logo and customize the “Title Text” and “Footer”. :) !DO NOT Enable this skin plugin. Enabling it will mess up your enter Guest module skin.
(3) - Save these changes then go to “Operator Logins > Profiles” and edit your sponsor profile…
(4) - Under “User Interface” you can change the skin for this sponsor profile. I selected “Custom Skin 1”. And now any customization I make to this skin plugin will change the look and feel of my sponsor portal with out changing the entire guest module. 

 

Thanks!

Contributor II
Posts: 53
Registered: ‎11-24-2014

Re: How to replace the "Aruba Networks" logo from Guest Manager webUI

Thanks for looking into this. It works great post guest operator login, but what about on the actual login prompt. It still has the Clearpass Guest skin.

 

 

 

Aruba Employee
Posts: 37
Registered: ‎09-23-2013

Re: How to replace the "Aruba Networks" logo from Guest Manager webUI

To edit the actual ClearPass [operator login] skin selection, try:

CPGuest > Admin > Operator Logins > Login Config > Login Skin

Guru Elite
Posts: 8,458
Registered: ‎09-08-2010

Re: How to replace the "Aruba Networks" logo from Guest Manager webUI

Guest > Administration > Plugin Manager > Local Operator Logins > Login Skin


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: