Security

Reply
Frequent Contributor II

I want to do wired guest access on Cisco Switch?

Dears I want to use Wired Guestt ccess on Cisco Siwtch 2960 and I want to know the configurations of that on both Cisco Switch and Clearpass :

 

for Cisco also how to do Pre-auth role and how to do default role like the aruba controller or aruba switch

Guru Elite

Re: I want to do wired guest access on Cisco Switch?

Have you considered working with a ClearPass partner?

Otherwise, there is documentation on Cisco's website for configuring web authentication.


Thanks,
Tim

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Regular Contributor I

Re: I want to do wired guest access on Cisco Switch?

Did you get this configuration working?  I am trying to set up a NAC port on a cisco switch that would allow a guest user to authenticate to a captive portal page.  If you got it working could you please share your setup?

 

Contributor II

Re: I want to do wired guest access on Cisco Switch?

I got this working. You have to send a URL redirect and redirect ACL back to the switch from the intial auth. Once redirected, there has to be a separate service policy for a WebAuth (through Clearpass Guest portal). Once the WebAuth takes place, you should mark some attribute that they are a guest user and then role map based on that. On the re-auth, guest access should work.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: