Security

Reply
New Contributor
Posts: 2
Registered: ‎04-02-2013

Implementing VIA and would like to connect to an external DHCP server

Aruba TAC said that we needed to have the DHCP local for the VIA to work. I think it should work that the VIA client comes in and goes to the ip helper address of the DHCP server and gets and address.

Aruba
Posts: 1,368
Registered: ‎12-12-2011

Re: Implementing VIA and would like to connect to an external DHCP server

Please see this VRD for a good overview on VIA.  However, it isn't DHCP per se...it's a local pool (L2TP) for the inner IP in the tunnel.

 

DHCP isn't involved with VIA as the client will get an address at that remote location just like any other client. 

 

http://www.arubanetworks.com/wp-content/uploads/VIAAppNote_2012-06-11.pdf

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Search Airheads
Showing results for 
Search instead for 
Did you mean: