Security

Reply
Contributor I
Posts: 29
Registered: ‎06-22-2012

Is it possible to get use the 'magicvlan' ID3333 to provide guests with a option 252 DHCP PAC?

Hi

I would like to use the default 'magicvlan' which is automatically set up when creating a 'guest' WLAN profile but I would like the internal DHCP to issue 'guests' on this SSID an option 252 proxy server address (10.10.xx.xx).  Is this possible using the CLI?

 

If so could some one provide me with the commands?

 

Thanks

 

 

Aruba
Posts: 1,368
Registered: ‎12-12-2011

Re: Is it possible to get use the 'magicvlan' ID3333 to provide guests with a option 252 DHCP PAC?

This is not possible with the built in "virtual controller assigned" DHCP method.  There may be a workaround where you can create a VLAN with a local DHCP scope and then src nat all the traffic out of the VC. However, you would then be responsible for trunking the created VLAN ID on the LAN.  

 

You're easier option is to use a VLAN on the LAN and a DHCP in the LAN as well to assign the option value...

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Contributor I
Posts: 29
Registered: ‎06-22-2012

Re: Is it possible to get use the 'magicvlan' ID3333 to provide guests with a option 252 DHCP PAC?

Many thanks for your reply. I was thinking the same thing. Regards David

SethFiermonti wrote:

This is not possible with the built in "virtual controller assigned" DHCP method.  There may be a workaround where you can create a VLAN with a local DHCP scope and then src nat all the traffic out of the VC. However, you would then be responsible for trunking the created VLAN ID on the LAN.  

 

You're easier option is to use a VLAN on the LAN and a DHCP in the LAN as well to assign the option value...


Search Airheads
Showing results for 
Search instead for 
Did you mean: