Security

Reply
Occasional Contributor II

Leap Issue Second

HI All,

 

Regarding this

http://community.arubanetworks.com/aruba/attachments/aruba/unified-wired-wireless-access/49619/1/ARUBA-PFB-20150430_Leap_Second_Field_Bulletin_Rev-3.0511.pdf

In our enviroment we have 3 Masters Controllers and 23 local controllers. Should I proceed to disable the NTP of each of the controlling server before June 30 and re-activate the July 1 to avoid any abnormality? All controllers have AOS 6.3.1.8

What are the risks of not take the recommended actions?

Thanks in advanced.

Regards,

 

Re: Leap Issue Second

To avoid any issue, yes, disable NTP.  What hardware models are you running?

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Occasional Contributor II

Re: Leap Issue Second

We have differents models:

3200

600

650

7002

3400

But, no problem, we will to proceed to disable the NTP server according with aruba's recommendations.

 

Thanks a lot!

Guru Elite

Re: Leap Issue Second

Blanca Nieto,

 

NTP servers are only defined on the master controllers and pushed to the locals when you save the configuration.  You would just need to remove the NTP servers on the 3 masters and save the configuration.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: