Security

Reply
Occasional Contributor II

MGMT and Data Port in ClearPass

Hi Experts,

 

Good Day!

 

I would like to ask what are the traffic passing in the MGMT and DATA Port in ClearPass?

 

Thanks

Re: MGMT and Data Port in ClearPass

Please check the Service Routing Technote, that is available from https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/EntryId/7961/Default.aspx

 

My personal advice would be to just use the management port, and only use the data port after you read and understood the Technote. ClearPass works fine with just a single interface, and having just one interface keeps your design simple in most cases.

 

In short, when you enable both ports, all outgoing traffic will originate from the data-port, unless it is local for the management port subnet, or if there is a management route that can be set on the command-line only.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: