Security

Reply
New Contributor
Posts: 2
Registered: ‎10-28-2015

Master - Standby issue with synchronizing Radius server key

[ Edited ]

Hi to all,

 

I have a issue with synchronizing radius server key from master to local WLC.

Basically all config is synchronized but key on WLC2 for Radius server is Changeme:

 

#show aaa authentication-server radius server-radius
RADIUS Server "server-radius"
----------------------------
Parameter                              Value
---------                              -----
Host                                   10.0.252.36
Key                                    Changeme

 

Key can not be changed/added on WLC2 as it is Master-Standby configuration. I tried to save configuration/wr mem on WLC1 but key stayed the same.

 

 #show switches

All Switches
------------
IP Address   Name         Location  Type    Version         Status  Configuration State  Config Sync Time (sec)  Config ID
----------   ----         --------  ----    -------         ------  -------------------  ----------------------  ---------
10.20.132.8  wlc1  1IFC.20F  master  6.1.3.13_43996  up      UPDATE SUCCESSFUL    0                       1016
10.20.132.7  wlc2  1IFC.20F  local   6.1.3.13_43996  up      UPDATE SUCCESSFUL    9                       1016

 

Is there any special command to trigger synchronization of Radius servers or what should be next step in troubleshooting?

 

Thanks in advance.

MVP
Posts: 1,406
Registered: ‎11-30-2011

Re: Master - Standby issue with synchronizing Radius server key

did you ever figure this one out? i can't really think of anything expect a restart of something like that. i don't know of any extra sync command or such.

 

did it really not work btw? were requests from that local denied by the radius server?

 

which ArubaOS version are you running?

 

else there is always support to contact.

Aruba
Posts: 1,285
Registered: ‎08-29-2007

Re: Master - Standby issue with synchronizing Radius server key

Have you tried to remove and readd, or create a new one?

If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
New Contributor
Posts: 2
Registered: ‎10-28-2015

Re: Master - Standby issue with synchronizing Radius server key

[ Edited ]

Hi to all,

Aruba adviced to use command:

 

cfgm set sync-type complete

 

It was on: ArubaOS (MODEL: Aruba6000), Version 6.1.3.13

 

This helped and radius server configuration has synched right away. Everything else was working also.

Hoping this will help somebody else.

 

Peter

 

Aruba Employee
Posts: 98
Registered: ‎03-26-2013

Re: Master - Standby issue with synchronizing Radius server key

Search Airheads
Showing results for 
Search instead for 
Did you mean: