Security

Reply
Occasional Contributor II
Posts: 15
Registered: ‎02-12-2016

Master/local controller ssl certs.

Good morning community,

When you have two controllers set up in a master/local setup do you have to one ssl cert for each controller? I installed the ssl cert on the master but my users are still having to add exceptions in their browsers or they can't pull up the portal. I can still see the old cert in the certification list along with the new one but when I try to delete it, it says cert is either not present or referenced by an application. On the master the new cert is listed under captive portal but on the local it says default. If someone could help it would be greatly appreciated. Thanks.

Guru Elite
Posts: 8,456
Registered: ‎09-08-2010

Re: Master/local controller ssl certs.

The captive portal is served up from the local controller. Certificates are not pushed from the master to locals. You would need install certs on each controller.

 

See here >> http://community.arubanetworks.com/t5/Controller-Based-WLANs/ArubaOS-Default-Certificate-Revocation-FAQ-Controllers/ta-p/275809


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II
Posts: 15
Registered: ‎02-12-2016

Re: Master/local controller ssl certs.

Thank you Sir.

Search Airheads
Showing results for 
Search instead for 
Did you mean: