Security

last person joined: yesterday 

Forum to discuss Enterprise security using HPE Aruba Networking NAC solutions (ClearPass), Introspect, VIA, 360 Security Exchange, Extensions, and Policy Enforcement Firewall (PEF).
Back to discussions
Expand all | Collapse all

Motorola WiNG 5.x Radius CoA doesn't work

This thread has been viewed 0 times

  • 1.  Motorola WiNG 5.x Radius CoA doesn't work

    Posted Oct 05, 2017 10:39 AM

    Hi

     

    I'm trying to integrate Motorola Controller WiNG 5.x with Aruba ClearPass OnGuard.

    As I have learned this controller support Radius CoA as for example we can see here:

    http://wirelesssolutions-blog.blogspot.com/2014/02/wing-radius-attributes.html

     

    I have configured SSID with 802.1x and enabled dynamic vlan feature, that seems works ok, then I have tried to terminate session via Radius CoA. Authentication works ok. SSID in tunneled.

    I have enabled Radius Dynamic Authorization option under Advanced of WLAN settings.

     

    I have tried built in Motorola enforcement profile and some other, also send Radius attribues as in above link (1, 31, 44)

    But still without success.

     

    Can someone help ? Has anybody similar problem ?

     

    I'm not very fluent on Motorola solution, but already works some time on it

     

    Regrds



  • 2.  RE: Motorola WiNG 5.x Radius CoA doesn't work

    EMPLOYEE
    Posted Oct 05, 2017 10:47 AM

    What is shown on the CoA tab in access tracker?



  • 3.  RE: Motorola WiNG 5.x Radius CoA doesn't work

    Posted Oct 05, 2017 11:31 AM

    Hi

     

    What do you mean by CoA tab ? sorry but I can't find it.

    You mean Radius response under Output TAB ?

     

    regards

     

    Karol



  • 4.  RE: Motorola WiNG 5.x Radius CoA doesn't work

    EMPLOYEE
    Posted Oct 05, 2017 11:39 AM
    After manually issuing a DM/CoA from access tracker, a CoA tab will appear on the initial request.


  • 5.  RE: Motorola WiNG 5.x Radius CoA doesn't work

    Posted Oct 05, 2017 12:05 PM

    ok, thank you

     

    It seems that now it works :)

     

    Your guides led me to solution, but it is not clear for me

     

    One issue:

     

    When I try to make CoA manualy I can do it only for one Enforcement profile (drop down list: Radius CoA Type) although I have couple of it.

     

    When I have changed this profile to work with Motorola (1,31 and 44) and added it to policy, It stareted to work

     

    Why it is so ?

    I forget about something ?

     

    regards

     

    Karol