Security

Reply
Contributor II

Moving from WPA2-PSK to WPA2-Enterprise

We are starting a transition from PSK to Ent. We are a Windows shop and will be using NPS (Windows 2008). I was hoping that someone who has implemented this previously could give me some tips, hints or advice on the best way to go about this.

Thanks in advance.

Tim
Guru Elite

Re: Moving from WPA2-PSK to WPA2-Enterprise

Try this:

http://www.fatofthelan.com/technical/using-windows-2008-for-radius-authentication/


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Re: Moving from WPA2-PSK to WPA2-Enterprise

That's a pretty nice guide. They missed out the group policy bit but that's fairly straight forward.

You do not need to install any of the routing and remote access role, just the Network Policy Server.

Also, this is crucial, you need to register the network policy server to read active directory dial-in tab. Right-click NPS (Local), and then click Register server in Active Directory. When the Register Network Policy Server in Active Directory dialog box appears, click OK.
Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: