Security

Reply
Contributor II
Posts: 52
Registered: ‎12-15-2016

RADIUS IETF Session-Timeout and Termination-Action question

Hi Everyone, 

I'm testing VLAN assigment with Radius Attributes, the assigment works fine (Place authenticated device to it's corresponding VLAN), we want to disable the Dot1X Reatuhentication period on the Switch(default 1 hour) and control it with CPPM depending on wich device is connecting to the Network, we are using Dell switches but it looks like the Session-Timeout and Termination-Action is not working, we never see any authentication request after the timeout ends, any suggentions/experience on how to achieve this, thanks a lot in advance. RADIUS.JPG

Guru Elite
Posts: 8,637
Registered: ‎09-08-2010

Re: RADIUS IETF Session-Timeout and Termination-Action question

Many switches require a command to enable server-based timeout. Look for that in your RADIUS or interface config.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Contributor II
Posts: 52
Registered: ‎12-15-2016

Re: RADIUS IETF Session-Timeout and Termination-Action question

We are using Dell N series, I will search, thanks.

Contributor II
Posts: 52
Registered: ‎12-15-2016

Re: RADIUS IETF Session-Timeout and Termination-Action question

Opened a support case with TAC, will post the results in the next few days, based on the switch documentation the Radius Session-timeout and termination-Action are enable by default and should be working with no issues. 

Search Airheads
Showing results for 
Search instead for 
Did you mean: