Security

Reply
Contributor II
Posts: 48
Registered: ‎05-14-2012

Radius Request from local controller to CPPM 6.1

If I have a master/local setup (all APs are terminated at local), does the radius request come from master's IP or local's IP? The reason I am asking this because even though I don't have the master's IP listed under Network > Devices, when I do "AAA Test Server" from the local, I see the master's IP in the logs.

MVP
Posts: 4,301
Registered: ‎07-20-2011

Re: Radius Request from local controller to CPPM 6.1

 

The request will be coming from the local controller.

 

Make sure that you configure the Radius source IP address or NAS IP to be local controller IP address 

 

This configuration is done at the local controller side of things.

 

Radius.png

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Contributor II
Posts: 48
Registered: ‎05-14-2012

Re: Radius Request from local controller to CPPM 6.1

Thank you for your quick response.

Search Airheads
Showing results for 
Search instead for 
Did you mean: