Security

Reply
Contributor I
Posts: 28
Registered: ‎11-23-2011

Test Radius Authentication with Command PLease HElp!!

[ Edited ]

Im trying to run a command that tests radius authentication. I have command(see below) but this does not seem to work on aruba controllers. Does anyone know a more recent command that i can use to test radius authentication??

 

Example below. thanks in advanced for anyone who can help me with this.

 

test access radius-server address user username password password secret secret <authentication-port port> <retry number> <source-address address> <timeout number
Regular Contributor I
Posts: 171
Registered: ‎04-13-2009

Re: Test Radius Authentication with Command PLease HElp!!

Try this:

 

 #aaa test-server mschapv2 <Server_Name> <Username> <password>

 

Fill in the <fields>

 

-ELiasz

-------------------
ACDX, ACCP, CISSP, CWNA
Contributor I
Posts: 28
Registered: ‎11-23-2011

Re: Test Radius Authentication with Command PLease HElp!!

We actually can't test that way because we are using certifcates to authenticate.

Regular Contributor I
Posts: 171
Registered: ‎04-13-2009

Re: Test Radius Authentication with Command PLease HElp!!

Well that makes sense. The only thing this will tell you is if the server is reachable. If it only accept certs, you will get Authentication Failed when you test, but at least you know it responds. If you get a Authentication Timed Out you know there is a connectivity issue.

 

I'm not sure how you could test authentication using certs from the commandline.

 

-ELiasz

-------------------
ACDX, ACCP, CISSP, CWNA
Search Airheads
Showing results for 
Search instead for 
Did you mean: