Security

Reply
Occasional Contributor II
Posts: 15
Registered: ‎05-10-2014

Wi-Fi authentication with passcode only

Dear all,

We have Aruba 3600 controller with 6.3.1.6 OS and several AP105 access points.

End users use Active Directory username & password to authenticate on Wi-Fi (Employee SSID); whereas for Guest user we generate username/password which they tap it on the captive portal (Guest SSID).

 

Is there anyway to create a separate SSID and make it authenticate with passcode only i.e. like we have in residential broadband router.

 

Any help would be much appreciated, thank you.

Guru Elite
Posts: 7,839
Registered: ‎09-08-2010

Re: Wi-Fi authentication with passcode only

WPS is not possible in an enterprise network. 

Sent from Nine

Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
Aruba
Posts: 1,279
Registered: ‎08-29-2007

Re: Wi-Fi authentication with passcode only


bickyz wrote:

Dear all,

We have Aruba 3600 controller with 6.3.1.6 OS and several AP105 access points.

End users use Active Directory username & password to authenticate on Wi-Fi (Employee SSID); whereas for Guest user we generate username/password which they tap it on the captive portal (Guest SSID).

 

Is there anyway to create a separate SSID and make it authenticate with passcode only i.e. like we have in residential broadband router.

 

Any help would be much appreciated, thank you.


I assume this is for guest users and you want WPA2-PSK ?  This is possible in the ssid-profile.  Make sure the aaa-profile assigned to the vap has default-psk as the dot1x profile as well.


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
Search Airheads
Showing results for 
Search instead for 
Did you mean: