Security

Reply
Occasional Contributor II
Posts: 61
Registered: ‎06-27-2016

Wireless Guest Access

Hi

 

I am new to CP and want to configure wireless guest access, so I configured the aruba WLC for the required settings (Guest-SSID, Captive-portal redirection to CP guest page, radius,...)

 

But what are the required services in CP, as i created a new service for the guset access, but in access-tracker the wireless user is not assigned to any service when connecting and also the users is not redirected to the CP guest page.

 

 

Mahmoud
Aruba
Posts: 1,545
Registered: ‎06-12-2012

Re: Wireless Guest Access

https://ase.arubanetworks.com/solutions/id/3

Thank You,
Troy

--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.

--Problem Solved? Click "Accepted Solution" in a post.
Occasional Contributor II
Posts: 61
Registered: ‎06-27-2016

Re: Wireless Guest Access

Hi

 

This link doesnt have details about the clear pass configuration part.

As the controller part is done, but i dont know what are the required service to create in CP.

since I got an access-tracker message that wireless user not assigned to a service.

 

Thanks

Mahmoud
Aruba
Posts: 1,545
Registered: ‎06-12-2012

Re: Wireless Guest Access

Yes it does. The last tab will send you a file for CPPM or you can click the link on the bottom of the page that links to a how to doc

 

image.pngimage.png

Thank You,
Troy

--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.

--Problem Solved? Click "Accepted Solution" in a post.
Occasional Contributor II
Posts: 61
Registered: ‎06-27-2016

Re: Wireless Guest Access

If you have another video or document, or if you can describe what are the required services to create.

 

I am using the trial license, so is there a need to install another license, or the trial shall support for Guest access?

Mahmoud
Guru Elite
Posts: 21,272
Registered: ‎03-29-2007

Re: Wireless Guest Access

Please try the document here:  https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=10345  It is for configuration between ClearPass and Aruba for both 802.1x and Guest.  It will not be exactly like the ASE configuration, so you will probably have to remove the ASE configuration and use the method in the document.

 

The evaluation license should be an enterprise license, which means that guest should be included, as well.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: