Security

Reply
Occasional Contributor II

dot11x timeouts

Outside of   show auth-tracebuf , what other options do I have to indicate where the issues lies for dot11x timeouts?

 

Trying to figure out if there is a way for the reason why we are seeing authentications:

 

A.  Fail from the Primary AAA Auth Server servers and hit the secondary.

B.  See the reason behind the timeouts.  

 

Was thinking a sh datapath session table | i *ip of aaa server* would 

 

Any suggestions?  Would love some concrete options to show our ACS team when we have issues, or to at least isolate if there is an issue on our end.

 

Regards!

 

Guru Elite

Re: dot11x timeouts

"show aaa authentication-server radius statistics" is a good resource for this.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: