Security

Reply
New Contributor
Posts: 2
Registered: ‎07-10-2014

how can i set up authentications RADIUS (ws2003) step by step? - i'm a novice ;)

[ Edited ]

Hi,
could you tell me (step by step) how can I configure authentication ( on the Aruba controller) ? my hardware it's Aruba 650  and 4 AP 105 (  campus mode) my Aruba650 is connected with Radius server and communications it's ok (I check "diagnostic tab on controller" and event viewer on Radius server )....but I don't know how can I configure policy and roles? ...i try two weeks and nothing ... our workers can't connected to "internal wireless network"

 

thank you for help ...(my boss wanna kill me ;) )

 

 

 

 

Guru Elite
Posts: 8,633
Registered: ‎09-08-2010

Re: how can i set up authentications RADIUS step by step? - i'm a novice ;)

Frequent Contributor II
Posts: 184
Registered: ‎04-17-2013

Re: how can i set up authentications RADIUS (ws2003) step by step? - i'm a novice ;)

Hi,

 

PFA for WS 2003 IIS step by step config.

Add radius server in controller.

Configuration -> Authentication -> Servers -> Radius Server

 

Regards,

Nik..

New Contributor
Posts: 2
Registered: ‎07-10-2014

Re: how can i set up authentications RADIUS (ws2003) step by step? - i'm a novice ;)

Hi, thank you for solutions... I have domain controller and radius (working ok - user have a grant access) is added to the controller but question is - which policy and roles must be add in the aruba (vlan for role must be assigned?) i have to use default role and policies?

Aruba
Posts: 1,545
Registered: ‎06-12-2012

Re: how can i set up authentications RADIUS (ws2003) step by step? - i'm a novice ;)

There are a lot of different How-To docs here

 

http://community.arubanetworks.com/t5/tkb/communitypage

 

http://community.arubanetworks.com/t5/Community-Tribal-Knowledge-Base/Roles-and-Policies/ta-p/165784

 

Or you can use the VRD

 

http://www.arubanetworks.com/resources/reference-design-guides/

 

 

Thank You,
Troy

--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.

--Problem Solved? Click "Accepted Solution" in a post.
Guru Elite
Posts: 21,259
Registered: ‎03-29-2007

Re: how can i set up authentications RADIUS (ws2003) step by step? - i'm a novice ;)

Did you already try to use the Campus LAN Wizard to setup your network (Configuration> Wizards> Campus LAN)?  It should have asked you the VLAN and role you want your users to be in.

 

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Frequent Contributor II
Posts: 184
Registered: ‎04-17-2013

Re: how can i set up authentications RADIUS (ws2003) step by step? - i'm a novice ;)

[ Edited ]

Hi,

 

You are using radius authentication. If you have selected WPA2+AES security then role will be authenticated.

If you want to assign multiple internal vlan to user group with single SSID  then you will have to use user derivation rule.

There is AP group name is "default" in controller. Policy will be assigned as per role.

 

Kindly provide screenshot for clearity.

 

Regards,

Nik...

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: