Unified Wired & Wireless Access

Reply
Occasional Contributor II
juancarlos.perez@acuntia.es
Posts: 37
Registered: ‎01-03-2012
Accepted Solution

captive portal with wpa-psk

Hi all!

 

I would like to configure my ssid "guest" with wpa-psk encryption with passphrase, once the guest type the correct word the controller redirect to captive portal.

 

I'm trying to configure this, but the controller shows the following message:

Error processing command 'wlan ssid-profile "ssid-guest" opmode wpa2-psk-aes':Error: dot1x profile needs to be enabled in aaa profile "aaa_guest" to support opmode "wpa2-psk-aes" configured in ssid profile "ssid-guest"
anybody knows what commands i should type to enable dot1x profile in aaa profile "aaa_guest"?
maybe the questions is so easy but i'm not sure about the config, so i prefer to ask here before doing something wrong.
The config of "aaa_guest":

aaa profile "aaa_guest"
initial-role "role-guest-logon"
dot1x-default-role "role-guest-authen"

 

 

thanks in advance!

 

Moderator
cjoseph
Posts: 12,898
Registered: ‎03-29-2007

Re: captive portal with wpa-psk


juancarlos.perezromero@telindus.es wrote:

Hi all!

 

I would like to configure my ssid "guest" with wpa-psk encryption with passphrase, once the guest type the correct word the controller redirect to captive portal.

 

I'm trying to configure this, but the controller shows the following message:

Error processing command 'wlan ssid-profile "ssid-guest" opmode wpa2-psk-aes':Error: dot1x profile needs to be enabled in aaa profile "aaa_guest" to support opmode "wpa2-psk-aes" configured in ssid profile "ssid-guest"
anybody knows what commands i should type to enable dot1x profile in aaa profile "aaa_guest"?
maybe the questions is so easy but i'm not sure about the config, so i prefer to ask here before doing something wrong.
The config of "aaa_guest":

aaa profile "aaa_guest"
initial-role "role-guest-logon"
dot1x-default-role "role-guest-authen"

 

 

thanks in advance!

 


try :

 

config t

aaa profile "aaa_guest"

authentication-dot1x defalt

 

Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
Occasional Contributor II
juancarlos.perez@acuntia.es
Posts: 37
Registered: ‎01-03-2012

Re: captive portal with wpa-psk

thanks it works!

 

now clients has to enter the wpa2 key and after they will be redirected to captive portal.

 

 

thanks!

Moderator
cjoseph
Posts: 12,898
Registered: ‎03-29-2007

Re: captive portal with wpa-psk

Glad that we can help!

Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
Occasional Contributor II
ahmad.osman@hasoub.com
Posts: 13
Registered: ‎04-13-2009

Re: captive portal with wpa-psk

i facing the same issue , but i want to know what the cause of this error ??

Moderator
cjoseph
Posts: 12,898
Registered: ‎03-29-2007

Re: captive portal with wpa-psk

Use the WLAN/LAN Wizard to create the Captive Portal to Avoid that error.

 

Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
Moderator
cjoseph
Posts: 12,898
Registered: ‎03-29-2007

Re: captive portal with wpa-psk

Wpa-psk requires a 802.1x profile in the AAA profile. You see that error when it is not configured. The wizard creates it automatically.
Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
Occasional Contributor II
ahmad.osman@hasoub.com
Posts: 13
Registered: ‎04-13-2009

Re: captive portal with wpa-psk

i tried to make it by the wizard many time , but nothing happen also the same error when i try to make a new AP group or new SSID

Search Airheads
Showing results for 
Search instead for 
Do you mean