Voice and Video

Reply
Frequent Contributor I

QoS for VoIP WiFi on the wired side

We are testing some Cisco wifi VoIP phones. Following the recommendations on Chapter 30 for Aruba OS 5.0 I have an SSID for VoIP configured. I could not find any info on best practices for QoS on the wired side connecting the APs and controller to the network.
Question is:
- Do we need QoS on the switch port connecting the AP to the network?
- De we need QoS on the switch port connecting the Controller to the network?

Thanks,

Marcelo
Marcelo Lew
Wireless Network Architect-Engineer
University of Denver
Guru Elite

No

The short answer is normally no.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Occasional Contributor II

Re: QoS for VoIP WiFi on the wired side

But I guess we should at least trust the DSCP values on the switchports connecting to the controller to retain the QoS labels end to end?
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: