The LACP is working right now. Not sure exactly why, but the customer rebooted the swithes, but the second VSF link is out. Weird.
First try:
Aruba01(config)# vsf member 1 link 1 1/51-1/52
All configuration on this port has been removed and port is placed in VSF mode.
Aruba01(config)# show run interface 1/52
Running configuration:
interface 1/52
untagged vlan 1
exit
Second try:
Aruba01(config)# vsf member 1 link 1 1/52
All configuration on this port has been removed and port is placed in VSF mode.
Aruba01(config)# show run interface 1/52
Running configuration:
interface 1/52
untagged vlan 1
exit
Aruba01(config)# show vsf link
VSF Member 1
Link Peer Peer
Link Link-Name State Member Link
---- ---------- -------- ------ ----
1 I-Link1_1 Up 2 1
2 I-Link1_2 Down 0 0
VSF Member 2
Link Peer Peer
Link Link-Name State Member Link
---- ---------- -------- ------ ----
1 I-Link2_1 Up 1 1
2 I-Link2_2 Down 0 0
VSF CONFIG
enable domain 1
member 1
type "JL254A" mac-address 98f2b3-bcb780
priority 128
link 1 1/51-1/52
link 1 name "I-Link1_1"
link 2 name "I-Link1_2"
exit
member 2
type "JL254A" mac-address 98f2b3-bc4840
priority 128
link 1 2/51-2/52
link 1 name "I-Link2_1"
link 2 name "I-Link2_2"
exit
port-speed 10g
exit
Also, I've seem some CRCs errors (LACP port that use the DAC Cable 5 meters).