Hi all,
I'm setting up a 2930 switch in combination with Clearpass.
I applied following config:
radius-server host 192.168.1.1 key test
radius-server host 192.168.1.1 dyn-authorization
radius-server host 192.168.1.2 key mhCP6RjWBCsFxRnWXiWRT67yFZOYLgaF
radius-server host 192.168.1.2 dyn-authorization
aaa authentication mac-based chap-radius
aaa authentication port-access eap-radius
aaa port-access authenticator 1/10 unauth-vid 290
aaa port-access mac-based 1/10 unauth-vid 290
aaa port-access authenticator active
When I check the Radius requests, i still see 0. Looks like no requests are being sent by the switch. What do I do wrong?
Authentication UDP Port : 1812 Accounting UDP Port : 1813
Round Trip Time : 0 Round Trip Time : 0
Pending Requests : 0 Pending Requests : 0
Retransmissions : 0 Retransmissions : 0
Timeouts : 0 Timeouts : 0
Malformed Responses : 0 Malformed Responses : 0
Bad Authenticators : 0 Bad Authenticators : 0
Unknown Types : 0 Unknown Types : 0
Packets Dropped : 0 Packets Dropped : 0
Access Requests : 0 Accounting Requests : 0
Access Challenges : 0 Accounting Responses : 0
Access Accepts : 0
Access Rejects : 0
Kind regards,