Wired Intelligent Edge (Campus Switching and Routing)

Reply
New Contributor

Aruba LACP algorithm recommendation

What is the recommended LACP load balancing algorithm (from the switch perspective) for both Aruba Controllers and APs?

I have enabled LACP and configured some APs, however I have taken a guess as to what algorithm to use.

I am using Dell PowerConnect swiches, so I have the following options available:
1 - Src MAC, VLAN, EtherType, Src module and portId.
2 - Dest MAC, VLAN, EtherType, Src module and portId.
3 - Src IP and Src TCP/UDP port.
4 - Dest IP and dest TCP/UDP port.
5 - Src/Dest MAC, VLAN, EtherType, Src MODID/port.
6 - Src/Dest IP and Src/Dest TCP/UDP port.
7 - Enhanced hashing mode.

Currently I have the following algorithms set:
Switch -> AP225 = 6 - Src/Dest IP and Src/Dest TCP/UDP port.
Switch -> W-7210 = 6 - Src/Dest IP and Src/Dest TCP/UDP port.

New Contributor

Re: Aruba LACP algorithm recommendation

Does anyone know the LAG recommendations from Aruba?

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: