Wired Intelligent Edge

last person joined: 2 days ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Can someone point me to a guide to connect 3 210's to a Cisco 2960 switch

This thread has been viewed 0 times

  • 1.  Can someone point me to a guide to connect 3 210's to a Cisco 2960 switch

    Posted Dec 18, 2014 02:19 PM

    I have three aruba WAPs connected to a Cisco 2960 switch. what i want is that each WAP supports 5 networks like this:

     

    Company One guest VLAN (vlan 200)

    Company One inside VLAN (vlan (201)

    Company Two guest VLAN (vlan 202)

    Company Two inside VLAN (vlan 203)

     

    Plus a management VLAN. (vlan 2)

     

    i have no guide and would love some help getting this setup. 



  • 2.  RE: Can someone point me to a guide to connect 3 210's to a Cisco 2960 switch

    Posted Dec 18, 2014 02:41 PM

    Is this an IAP ?



  • 3.  RE: Can someone point me to a guide to connect 3 210's to a Cisco 2960 switch

    Posted Dec 18, 2014 02:48 PM

    It is a Aruba 210 Wireless Access Point, not sure what IAP is. 



  • 4.  RE: Can someone point me to a guide to connect 3 210's to a Cisco 2960 switch

    Posted Dec 18, 2014 03:47 PM

    they are IAP-210 Series Wireless Access Points



  • 5.  RE: Can someone point me to a guide to connect 3 210's to a Cisco 2960 switch
    Best Answer

    Posted Dec 18, 2014 03:58 PM

    Is that is the case you need to do the following :

     

    On the switch interface that you will connect each IAP 

    interface gig 0/1

    switchport trunk encapsulation dot1q

    switchport mode trunk

    switchport trunk allow vlan 200-203

    switchport trunk native vlan 2

     

    On the IAP

    2014-12-17 14_07_35-Instant.png

     

    Create a new Wired Setup:

    2014-12-18 15_59_03-Instant.png

     

    2014-12-18 15_54_58-Instant.png

     

    Then click next and finish

     

    2014-12-18 15_54_28-Instant.png



  • 6.  RE: Can someone point me to a guide to connect 3 210's to a Cisco 2960 switch

    Posted Dec 19, 2014 11:12 AM

    thank you so very much!