Our ArubaOS VC has a br0 interface with a NAT setup for the guest network. There is a gateway entry for the network that must be changed now due to a change in our infrastructure at school. I have not been able to figure out how to make this change in ArubaOS.
See the routing table below. I need to change the gateway from 172.16.0.101 to 172.16.0.105.
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
172.16.0.0 0.0.0.0 255.255.252.0 U 0 0 0 br0
10.100.0.0 0.0.0.0 255.255.252.0 U 0 0 0 br0
0.0.0.0 172.16.0.101 0.0.0.0 UG 0 0 0 br0
---- ------- ---- ---- --------------------- -------------- ------------- ------ ---- ------
ELHS-GUEST ELHS-GUEST 1 guest all Internal CP None NAT Mode Enabled - Default