Wired Intelligent Edge (Campus Switching and Routing)

View Only

last person joined: one year ago

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of HPE Aruba Networking switching devices, and find ways to improve security across your network.

Back to Library

Configuration is not getting to the switch using template group and it throws an error "Wrong file"

Kudos

Dec 25, 2017 11:43 PM

esupport

Why do see the wrong file warning when the aruba switch is managed by Aruba Central?

When the Aruba switch is managed by Aruba Central using template group then mandatory lines are required in the template to push to the configuration to the switch.

The following example shows the mandatory lines required in the template:

; J9727A Configuration Editor; Created on release #WB.16.03.0000x

; Ver #0e:73.b8.ee.34.79.3c.29.eb.9f.fc.f3.ff.37.ef:2f
module 1 type j9727a
include-credentials

If the mandatory lines are not added in the template group then switch would throw the following warning in the switch:

W 11/16/17 18:09:36 00155 update: Wrong file.

In the Aruba central, under Maintenance > Audit Trail, we can see the error - Full config push status: Failed, Message: "Wrong file."

Below is the sample from the Audit Trail:

16/11/2017 18:09:36

System

0.0.0.0

Configuration

Full config push status: Failed, Message: "Wrong file."

Once the mandatory lines are added to the template group then the configuration will be pushed to the switch.

Statistics

0 Favorited

0 Views

0 Files

0 Shares

0 Downloads

Wired Intelligent Edge (Campus Switching and Routing)

Configuration is not getting to the switch using template group and it throws an error "Wrong file"

Related Entries and Links