Wired Intelligent Edge

Hi.

When I try to put ports 22 and 23 into a channel port on my S1500, I get this error message:

interface port-channel 0 port-channel-members add gigabitethernet 0/0/22 : Error: Interface is configured with non-default QoS profile
interface port-channel 0 port-channel-members add gigabitethernet 0/0/23 : Error: Interface is configured with non-default QoS profile

Has  anyone else run into ths message? Am I forgetting to do something prior to trying to creating the channel port?

Thank you

Run the show interface-config gig 0/0/22 and 0/0/23 andd see if it has a different QoS profile attached , those should have the same QoS profile as the port-channel

Hi Victor.

Thanks for your reply. I appreciate any help I can get.

As far as I can see, they have the same QoS profile. Here is what I see when I run the commands that you suggested:

(200-WLAN) (config) # show interface-config gigabitethernet 0/0/22

gigabitethernet "0/0/22"
------------------------
Parameter Value Config De rivation
--------- ----- --------- --------
Interface MSTP Profile default default
Interface Rapid PVST Profile default default
Interface GVRP Profile N/A gigabitet hernet0/0/22
Interface Tunneled Node Profile N/A gigabitet hernet0/0/22
Interface VOIP Profile N/A gigabitet hernet0/0/22
Interface LLDP Profile lldp-factory-initial default
Interface PoE Profile poe-factory-initial default
Interface Ethernet Link Profile default default
Interface OAM Profile N/A gigabitet hernet0/0/22
Interface LACP Profile N/A gigabitet hernet0/0/22
Interface QoS Profile default gigabitethernet0/0/22
Interface Policer Profile N/A gigabitethernet0/0/22
Interface AAA Profile N/A gigabitethernet0/0/22
Interface Shutdown Disabled default
Interface MTU 1514 default
Interface Ingress ACL N/A gigabitethernet0/0/22
Interface Egress ACL N/A gigabitethernet0/0/22
Interface QoS Trust Mode aruba-device default
Interface Description N/A default
Interface Switching Profile Upstream-profile gigabitethernet0/0/22
Interface Security Profile N/A gigabitethernet0/0/22
Ingress Port Mirroring Profile N/A gigabitethernet0/0/22
Egress Port Mirroring Profile N/A gigabitethernet0/0/22
Static IGMP Multicast Router port for the VLANs 0 default
Static MLD Multicast Router port for the VLANs 0 default
Interface Trusted Mode Enabled default
HSL backup interface N/A gigabitethernet0/0/22
HSL preemption mode Off default
HSL preemption delay 100 default

 

(200-WLAN) (config) # show interface-config gigabitethernet 0/0/23

gigabitethernet "0/0/23"
------------------------
Parameter Value Config Derivation
--------- ----- -----------------
Interface MSTP Profile default default
Interface Rapid PVST Profile default default
Interface GVRP Profile N/A gigabitethernet0/0/23
Interface Tunneled Node Profile N/A gigabitethernet0/0/23
Interface VOIP Profile N/A gigabitethernet0/0/23
Interface LLDP Profile lldp-factory-initial default
Interface PoE Profile poe-factory-initial default
Interface Ethernet Link Profile default default
Interface OAM Profile N/A gigabitethernet0/0/23
Interface LACP Profile N/A gigabitethernet0/0/23
Interface QoS Profile default gigabitethernet0/0/23
Interface Policer Profile N/A gigabitethernet0/0/23
Interface AAA Profile N/A gigabitethernet0/0/23
Interface Shutdown Disabled default
Interface MTU 1514 default
Interface Ingress ACL N/A gigabitethernet0/0/23
Interface Egress ACL N/A gigabitethernet0/0/23
Interface QoS Trust Mode aruba-device default
Interface Description N/A default
Interface Switching Profile Upstream-profile gigabitethernet0/0/23
Interface Security Profile N/A gigabitethernet0/0/23
Ingress Port Mirroring Profile N/A gigabitethernet0/0/23
Egress Port Mirroring Profile N/A gigabitethernet0/0/23
Static IGMP Multicast Router port for the VLANs 0 default
Static MLD Multicast Router port for the VLANs 0 default
Interface Trusted Mode Enabled default
HSL backup interface N/A gigabitethernet0/0/23
HSL preemption mode Off default
HSL preemption delay 100 default

(200-WLAN) (config) #

Whats the QoS profile on the port channel group ?

Please find the attached screenshot of the GUI Qos Profile settings, also. Hope this helps.

(Host) #show qos-profile

QoS Profile List
----------------
Name References Profile Status
---- ---------- --------------
default 26 N/A
qos-none 0 Predefined
Total:2

Run the following command and try again :

(Lab_Aruba_MAS) (config) #no interface gigabitethernet 0/0/22

(Lab_Aruba_MAS) (config) #no interface gigabitethernet 0/0/23

That worked!

Many, many thanks, Victor.

Glad it did , revisited one of the other posts and noticed that it had each interface had the interface derivation config attached to it.

I have the same issue but the solution still did not work for me.  Any help would be greatly appreciated!! 

 

 

gigabitethernet "0/0/3"
-----------------------
Parameter Value Config Derivation
--------- ----- -----------------
Interface MSTP Profile Lab-BPDU-Guard default
Interface Rapid PVST Profile default default
Interface GVRP Profile N/A gigabitethernet0/0/3
Interface Tunneled Node Profile N/A gigabitethernet0/0/3
Interface VOIP Profile N/A gigabitethernet0/0/3
Interface LLDP Profile lldp-factory-initial default
Interface PoE Profile poe-factory-initial default
Interface Ethernet Link Profile default default
Interface OAM Profile N/A gigabitethernet0/0/3
Interface LACP Profile N/A gigabitethernet0/0/3
Interface QoS Profile default gigabitethernet0/0/3
Interface Policer Profile N/A gigabitethernet0/0/3
Interface AAA Profile N/A gigabitethernet0/0/3
Interface Shutdown Disabled default
Interface MTU 1514 default
Interface Ingress ACL N/A gigabitethernet0/0/3
Interface Egress ACL N/A gigabitethernet0/0/3
Interface QoS Trust Mode aruba-device default
Interface Description N/A default
Interface Switching Profile upstream_trunk gigabitethernet0/0/3
Interface Security Profile N/A gigabitethernet0/0/3
Ingress Port Mirroring Profile N/A gigabitethernet0/0/3
Egress Port Mirroring Profile N/A gigabitethernet0/0/3
Static IGMP Multicast Router port for the VLANs 0 default
Static MLD Multicast Router port for the VLANs 0 default
Interface Trusted Mode Enabled default
HSL backup interface N/A gigabitethernet0/0/3
HSL preemption mode Off default
HSL preemption delay 100 default

 

gigabitethernet "0/0/1"
-----------------------
Parameter Value Config Derivation
--------- ----- -----------------
Interface MSTP Profile Lab-BPDU-Guard default
Interface Rapid PVST Profile default default
Interface GVRP Profile N/A gigabitethernet0/0/1
Interface Tunneled Node Profile N/A gigabitethernet0/0/1
Interface VOIP Profile N/A gigabitethernet0/0/1
Interface LLDP Profile lldp-factory-initial default
Interface PoE Profile poe-factory-initial default
Interface Ethernet Link Profile default default
Interface OAM Profile N/A gigabitethernet0/0/1
Interface LACP Profile N/A gigabitethernet0/0/1
Interface QoS Profile default gigabitethernet0/0/1
Interface Policer Profile N/A gigabitethernet0/0/1
Interface AAA Profile N/A gigabitethernet0/0/1
Interface Shutdown Disabled default
Interface MTU 1514 default
Interface Ingress ACL N/A gigabitethernet0/0/1
Interface Egress ACL N/A gigabitethernet0/0/1
Interface QoS Trust Mode aruba-device default
Interface Description N/A default
Interface Switching Profile upstream_trunk gigabitethernet0/0/1
Interface Security Profile N/A gigabitethernet0/0/1
Ingress Port Mirroring Profile N/A gigabitethernet0/0/1
Egress Port Mirroring Profile N/A gigabitethernet0/0/1
Static IGMP Multicast Router port for the VLANs 0 default
Static MLD Multicast Router port for the VLANs 0 default
Interface Trusted Mode Enabled default
HSL backup interface N/A gigabitethernet0/0/1
HSL preemption mode Off default
HSL preemption delay 100 default

 

port-channel "0"
----------------
Parameter Value
--------- -----
LACP N/A
Interface MSTP Profile default
Interface Rapid PVST Profile default
Interface GVRP Profile N/A
Interface Ethernet Link Profile pc_default
Interface QoS Profile default
Interface Policer Profile N/A
Ingress Port Mirroring Profile N/A
Egress Port Mirroring Profile N/A
Interface Shutdown Enabled
Interface MTU 1514
Interface Ingress ACL N/A
Interface Egress ACL N/A
Interface QoS Trust Mode aruba-device
Interface Description N/A
Interface Switching Profile upstream_trunk
Interface Security Profile N/A
Static IGMP Multicast Router port for the VLANs 0
Static MLD Multicast Router port for the VLANs 0
HSL backup interface N/A
HSL preemption mode Off
HSL preemption delay 100
Port channel member list N/A

 

QoS Profile List
----------------
Name References Profile Status
---- ---------- --------------
default 4 N/A
qos-none 0 Predefined
Total:2

 

QoS Profile "default" (N/A)
---------------------------
Parameter Value
--------- -----
Traffic Class 0
Drop Precedence low
DSCP 0
802.1p N/A