Wired Intelligent Edge

last person joined: 2 days ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

ProCurve 2620 Config-catch File empty

This thread has been viewed 2 times

  • 1.  ProCurve 2620 Config-catch File empty

    Posted Feb 28, 2017 08:28 AM

    Dear colleagues,

    we are operating aprox. 600 Procurve 2620 switches.

    I use a perl script to connect via telnet and send a command to put the running.-config to a file on a tftp-server.

    About 40 of this files are empty, all others are fine. They are working all on newest firmware and i already compared two running-configs at a working put and a non-working put, but found no differences except the IP and Hostnames. I also tried to get the startup-config, same problem.

    Does anyone have an Idea?

    THX a lot for your suggestions

    regards from cologne / germany