Wired Intelligent Edge (Campus Switching and Routing)

Reply
Occasional Contributor I

TFTP Not working Aruba 3180M

Hi,

 

I am having trouble uploading images via TFTP.

I have 2 switches on the same broadcast network and set switch_A (ip=10.1.1.1/24 as a tftp server (tft server listen both) and switch_B (ip=10.1.1.2/24 as a tftp client.

When i execute a:

copy tftp flash 10.1.1.1 KB_16.02.0008.swi secondary

i get the following:

The secondary image will be deleted.

 

Continue (y/n)? y

Error in sending rq message.  Exceeded 5 retransmits.

000M Peer unreachable.

 

Both switches can ping each other but confused as to why TFTP is failing.

Occasional Contributor II

Re: TFTP Not working Aruba 3180M

Hi kainfs, 

 

Try with the command "copy tftp flash 10.1.1.1 KB_16_02_0008.swi secondary" - It needs the whole filename.

 

Justin

Occasional Contributor I

Re: TFTP Not working Aruba 3180M

Hi,

 

sorry I did type in the full image name originally. I forgot to include it in my original post.

I've now edited my original post.

Occasional Contributor II

Re: TFTP Not working Aruba 3180M

Any output in the "show log tftp" command?

Occasional Contributor II

Re: TFTP Not working Aruba 3180M

The file name in your original post shows "KB_16.02.0008.swi". 

 

Can you confirm that you're putting "KB_16_02_0008.swi" as the file name in the tftp command? 

 

They should be underscores in the file name, not periods.  

Occasional Contributor I

Re: TFTP Not working Aruba 3180M

Hi,

 

yes they are underscores.

I should have copied directly from the switch.

This is the actual command i typed and the resulting output:

 

Switch_B# copy tftp flash 10.1.1.1 KB_16_02_0008.swi secondary

The secondary image will be deleted.

Continue (y/n)? y

Error in sending rq message.  Exceeded 5 retransmits.

000M Peer unreachable.

Occasional Contributor I

Re: TFTP Not working Aruba 3180M

The message in the Show log tftp

states :

W 03/05/18 14:21:36 00136 tftp: ST1-CMDR: Connection to 10.1.1.1 failed

Re: TFTP Not working Aruba 3180M

Would it be possible to show both switch configurations?


@kainfs wrote:

Hi,

 

yes they are underscores.

I should have copied directly from the switch.

This is the actual command i typed and the resulting output:

 

Switch_B# copy tftp flash 10.1.1.1 KB_16_02_0008.swi secondary

The secondary image will be deleted.

Continue (y/n)? y

Error in sending rq message.  Exceeded 5 retransmits.

000M Peer unreachable.


 

Occasional Contributor I

Re: TFTP Not working Aruba 3180M

I've now changed the tftp server to listen on the data plane only on Switch_A.

 

I then run the following on Switch_B:

 

copy tftp flash 10.1.1.1 KB_16_02_0008.swi secondary

 

This time I get 000M transport error.

The tftp log gives:

W 03/06/18 08:02:36 00132 tftp: ST1-CMDR: RCVD error:1, msg: File not found.

 

Sh flash on Switch_A shows the image:

Image             Size (bytes) Date     Version

----------------- ------------ -------- --------------

Primary Image    :33116392 12/22/17 KB.16.04.0011

Secondary Image  :24407181 07/05/16 KB.16.02.0008

 

Occasional Contributor I

Re: TFTP Not working Aruba 3180M


@Dobias van Ingenwrote:

Would it be possible to show both switch configurations?


@kainfswrote:

Hi,

 

yes they are underscores.

I should have copied directly from the switch.

This is the actual command i typed and the resulting output:

 

Switch_B# copy tftp flash 10.1.1.1 KB_16_02_0008.swi secondary

The secondary image will be deleted.

Continue (y/n)? y

Error in sending rq message.  Exceeded 5 retransmits.

000M Peer unreachable.


 


Unfortunately i'm not allowed to post config. Is their certian portiosn of the config you are intrested in?

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: