What are error octets?
What causes error octets?
I just had 6 interfaces on three different switch stacks(s2500) have excessive error octets on interfaces with AP's(225) attached. All at roughly 12:22am
EX
GE0/0/9 is administratively Up, Link is Up, Line protocol is Up
Hardware is Gigabit Ethernet, Interface is GE0/0/9, Address is 00:0b:86:8c:c3:4b
Encapsulation ARPA, Loopback not set
Configured: duplex (Auto), Speed (Auto), FC (Off), Autoneg (On)
Negotiated: duplex (Full), Speed (1 Gbps)
Interface index: 10
MTU 1514 bytes
Link flaps: 1
Flags: Access, Trusted
Link status last changed: 6w4d 13:15:59 ago
Last update of counters: 0d 00:00:05 ago
Last clearing of counters: 6w4d 13:16:50 ago
Statistics:
Received 148493667 frames, 38621797155 octets
1 pps, 2.363 Kbps
148359541 unicast, 134072 multicast, 54 broadcast
0 runts, 33451 giants, 0 throttles
50912422 error octets, 0 CRC frames
Transmitted 265708451 frames, 96112637133 octets
3 pps, 3.682 Kbps
260827725 unicast, 4254173 multicast, 626553 broadcast
0 throttles, 0 errors octets, 0 deferred
0 collisions, 0 late collisions
PoE Information:
Administratively Enable, Port status: On, Power consumption: 9600 mW
PSE port status: On
Thanks in advance