How to Factory-Reset on a Detached ArubaStack Member

Aruba Employee
Requirement:

How to Factory-Reset on a Detached ArubaStack Member



Solution:

Starting from ArubaOS 7.4.0.3, you can reset a detached ArubaStack member that boots up as a line card to its factory defaults. This allows you to reset the password on the Mobility Access Switch if the login credentials are
lost.



Configuration:

To reset a line card to its factory-defaults:


1. Connect a local console to the serial port on the Mobility Access Switch.
2. From the console, login to the Mobility Access Switch using the username, password and the password, forgetme!.
3. Execute the following commands:
(LC-1) #restore factory_default stacking
(LC-1) #reload



Verification

After the reload the switch will boot up the image and come up with initial configuration page.

Version history
Revision #:
2 of 2
Last update:
‎07-30-2015 02:58 AM
Updated by:
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: