Wired Networks

How to configure Static ARP entry on MAS 7.4 code.

Aruba Employee

Environment : No special environment for this feature to work.

 

  1. Static ARP entry will never age.
  2. Corresponding RVI should be Up and configured with IP address for static ARP to show in output of show arp

(ArubaS1500-24P) #configure t
Enter Configuration commands, one per line. End with CNTL/Z 
(ArubaS1500-24P) (config) # arp 192.168.38.19 6c:f3:7f:c4:44:c7
(ArubaS1500-24P) (config) # arp 192.168.38.20 6c:f3:7f:c3:67:2a
 

  • Check arp table

(ArubaS1500-24P) #show arp
Codes: * - Local Addresses, S - Static, A - Auth
Total ARP entries: 10
IPV4 ARP Table
--------------
 Protocol    IP Address     Hardware Address   Interface  Age (min)
----------   ----------     ----------------   ---------  ---------
 * Internet  200.0.0.1      00:0b:86:8f:b7:f7  vlan2000   NA
 * Internet  192.168.210.3  00:0b:86:8f:b7:f7  vlan2100   NA
 * Internet  220.0.0.1      00:0b:86:8f:b7:f7  vlan3000   NA
 * Internet  221.0.0.1      00:0b:86:8f:b7:f7  vlan3100   NA
 * Internet  192.168.38.3   00:0b:86:8f:b7:f7  vlan38     NA
 * Internet  192.168.39.3   00:0b:86:8f:b7:f7  vlan39     NA
 * Internet  10.16.65.77    00:0b:86:8f:b7:f7  vlan4093   NA
   Internet  10.16.65.65    00:0b:86:8f:d9:f7  vlan4093   3138
 S Internet  192.168.38.19  6c:f3:7f:c4:44:c7  vlan38     NA
 S Internet  192.168.38.20  6c:f3:7f:c3:67:2a  vlan38     NA
(ArubaS1500-24P) #

Version history
Revision #:
1 of 1
Last update:
‎04-07-2015 01:42 PM
Updated by:
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.