Wired Networks

How to configure name-server on switch to use?

Aruba Employee

Name Server can be configured on Aruba switch using command 'ip name-server <ip_address>'.

 Example;

 (Aruba5000) (config) #ip domain lookup

(Aruba5000) (config) #ip name-server 10.1.1.50

(Aruba5000) (config) #ping 10.1.1.50

Press 'q' to abort.

Sending 5, 100-byte ICMP Echos to 10.1.1.50, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 0.323/0.3394/0.389 ms

(Aruba5000) (config) #ping www.yahoo.com

Press 'q' to abort.

Sending 5, 100-byte ICMP Echos to 209.131.36.158, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 15.91/16.4496/16.756 ms

(Aruba5000) (config) #

 

There is no Web User Interface option.

Version history
Revision #:
1 of 1
Last update:
‎07-01-2014 03:02 PM
Updated by:
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.