How to disable and enable audit-trail on Aruba Mobility Access Switches

Aruba Employee

Environment         This applies to all Aruba Mobility Access Switches and OS versions.

 

In Aruba Switches we do have an option to disable "audit-trail".

Below is the command to disable the same:


(ArubaS1500-24P) (config) #interface gigabitethernet 0/1/0 trusted port
(ArubaS1500-24P) (config) #write memory
Saving Configuration...

Configuration Saved.

(ArubaS1500-24P) (config) #show audit-trail 5

Aug 19 16:22:49  cli[1390]: USER:admin@10.20.25.33 COMMAND:<interface gigabitethernet "0/1/0" trusted port > -- command executed successfully
Aug 19 16:22:53  cli[1390]: USER:admin@10.20.25.33 COMMAND:<write memory > -- command executed successfully

(ArubaS1500-24P) (config) #no audit-trail  ====> This will disable audit-trail
(ArubaS1500-24P) (config) #write memory


(ArubaS1500-24P) (config) #interface gigabitethernet 0/1/0 no trusted port
(ArubaS1500-24P) (config) #write memory
Saving Configuration...

Configuration Saved.

(ArubaS1500-24P) (config) #
(ArubaS1500-24P) (config) #show audit-trail 5

Aug 19 16:22:49  cli[1390]: USER:admin@10.20.25.33 COMMAND:<interface gigabitethernet "0/1/0" trusted port > -- command executed successfully
Aug 19 16:22:53  cli[1390]: USER:admin@10.20.25.33 COMMAND:<write memory > -- command executed successfully

(ArubaS1500-24P) (config) #audit-trail  ====> This will enable audit-trail
(ArubaS1500-24P) (config) #write memory
Saving Configuration...

Configuration Saved.

(ArubaS1500-24P) (config) #interface gigabitethernet 0/1/0 no trusted port
(ArubaS1500-24P) (config) #write memory
Saving Configuration...

Configuration Saved.

(ArubaS1500-24P) (config) #show audit-trail 10

Aug 19 16:22:49  cli[1390]: USER:admin@10.20.25.33 COMMAND:<interface gigabitethernet "0/1/0" trusted port > -- command executed successfully
Aug 19 16:22:53  cli[1390]: USER:admin@10.20.25.33 COMMAND:<write memory > -- command executed successfully
Aug 19 16:28:15  cli[1390]: USER:admin@10.20.25.33 COMMAND:<write memory > -- command executed successfully
Aug 19 16:28:28  cli[1390]: USER:admin@10.20.25.33 COMMAND:<interface gigabitethernet "0/1/0" no trusted port > -- command executed successfully
Aug 19 16:28:32  cli[1390]: USER:admin@10.20.25.33 COMMAND:<write memory > -- command executed successfully

Version history
Revision #:
1 of 1
Last update:
‎11-13-2014 02:32 PM
Updated by:
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: