Loopback interfaces on Aruba Mobility Switches.

Aruba Employee

How many loopback interfaces can we configure on a Aruba mobility Switch?


Can we assign IP address from an existing subnet to the loopback interface?


How many IP addresses can we assign to a loopback interface?

 

 

Environment : This article applies to all Aruba Mobility Switches and code versions.

 

1. We can configure a maximum of 64 loopback interfaces on the Mobility Switch:

2. We cannot configure IP address from an already existing subnet to the loopback interface:

(ArubaS2500-24P) (config) #interface vlan 1
(ArubaS2500-24P) (vlan "1") #ip address 10.1.1.1 255.255.255.0
(ArubaS2500-24P) (vlan "1") #exit
(ArubaS2500-24P) (config) #interface loopback 0
(ArubaS2500-24P) (loopback "0") #ip address 10.1.1.2
Error: Secondary can't be same as primary


3. We can configure any number of IP addresses on a loopback interface.

Version history
Revision #:
1 of 1
Last update:
‎06-29-2014 11:38 AM
Updated by:
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: