Wired Networks

Single command to bring a port to default config in Aruba Switch
Q:

How can we bring a port to its default config in Aruba Switches?



A:

When working with Aruba Mobility Switches, there would be few instances where a port has to be bought to its default config state, so the new profiles can be applied again. Removing each associated profile would take time and gives us chance of configuration error. This one command suggested below would help us greatly:

 

Below is an output from the product version 7.4.

 

 

 

To bring the port back to the default config we have 2 options:

  • reset to default config with a single command
  • modify/remove the required parametes after logging into the port.

 

Reset to default config with a single command:

 

(ArubaS1500-24P) (config) #no interface gigabitethernet 0/0/10  
 

 

Version History
Revision #:
2 of 2
Last update:
‎03-07-2016 02:47 PM
Updated by:
 
Labels (1)
Contributors
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.