Wireless Access

Reply
Contributor II
Posts: 53
Registered: ‎11-20-2012

2.4 Ghz

I have a mixture of 93 and 105's AP's on my network with controller 3200xm Is there a way I can force all the access points to just use 2.4 ghz?

Frequent Contributor I
Posts: 83
Registered: ‎06-27-2007

Re: 2.4 Ghz

The AP-93s are single-radio and should default to the 2.4Ghz band. The AP-105s are dual radio and will provide simultaneous 2.4Ghz and 5Ghz service. If you want to get rid of 5Ghz service on the AP-105s, you can either disable the 5Ghz radio or set it to air-monitor mode. Both of these option are configured in the 802.11a radio profile for the AP-Group.

 

The 5Ghz band has numerous advantages over the 2.4Ghz band however. I am curious why you want to disable it?

Search Airheads
Showing results for 
Search instead for 
Did you mean: