Wireless Access

Reply
Contributor I

205H using 30W, how to limit power reservation

I have a whole bunch of 205Hs installed and they are all using 30W of power from the switch.  I have applied the "ap-poe-power-optimization enabled" to the provisioning profle.  That has reduced the 215 and 225 APs power consumption, but the 205Hs remain at 30watts.  The best I can tell is that they are reserving the power 'just in case' someone uses the PoE port.  

 

Is there a way to get them to stop reserving the extra power and just pull the power they require?

 

 

Guru Elite

Re: 205H using 30W, how to limit power reservation

What switch are you using?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Contributor I

Re: 205H using 30W, how to limit power reservation

Cisco 2960XR.  I just enabled 802.3az on the enet0 on the AP and from what I've read 802.3az is enabled by default starting from ios release 15.  And no change.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: