Wireless Access

Reply
Frequent Contributor II
Posts: 107
Registered: ‎04-15-2013

3400 Controller

I have a defaulted 3400 controller, re-porvisioned AP's and when I connect to the SSID and open google maps\maps its telling me my location as China.  I have confirmed that the time zone is set correctly on the controller.  The OS running is 6.3.1.6.  

 

Any thoughts?

Guru Elite
Posts: 8,637
Registered: ‎09-08-2010

Re: 3400 Controller

The location is based off your IP space/ISP, not any information from your wireless controller.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Frequent Contributor II
Posts: 107
Registered: ‎04-15-2013

Re: 3400 Controller

Thanks for the response.  The controller was over in China for a show and once it was brought back here it was reset and it's showing my maps application that I am in China still when connecting to the SSID that it's broadcasting.  Any other possibilities that would cause this?

MVP
Posts: 288
Registered: ‎08-27-2012

Re: 3400 Controller

It gets this information from your public IP address. If it's still somehow source nat'ing to something in China then that would be why.

ACDX #419 | ACMP |
Search Airheads
Showing results for 
Search instead for 
Did you mean: