Hello
I got a clietn with high memory utilization, over 94%
The controller is near the limit in Access points , they got 59 APS
I read in the manual "Controllers running at their maximum AP capacity may have a high level of memory utilization (over 75%), but as long as the memory utilization levels stay relatively constant and does not fluctuate +/- 5%, this does not indicate an error condition."
The thing is that last week it was on 89% or 90%
The firmware is 6.4.x lastest patch.
the controller has not crashed or anything... and everything seems to work just fine.
Cheers
Carlos