Wireless Access

Reply
Contributor I

3400 controller login issue

I have configured an aruba 3400 controller. After entering all the config,. the login ( CLI or WEBGUI) is taking an extremely long time. ANy troubleshooting ideas ? 

Re: 3400 controller login issue

Is this a new install?

 

Have you got RADIUS auth enabled?

 

Slow login on WebGUI + SSH + serial console?


ACMX#255 | ACMP | ACCP | AWMP
www.securelink.nl

Re: 3400 controller login issue

Can you get console access?

 

- Make sure that all your VLANs and Port are trusted 

- You should consider disabling STP on the controller too and allow the upstream switch do the STP

 

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Contributor I

Re: 3400 controller login issue

Yes, slow on WEBGUI+SSh+Cli

Contributor I

Re: 3400 controller login issue

Ports are trusted and STP is disabled

Re: 3400 controller login issue

Does this controller have high CPU usage?

 

"show cpuload"

 

"show cpuload current"


ACMX#255 | ACMP | ACCP | AWMP
www.securelink.nl
Contributor I

Re: 3400 controller login issue

CPU usage 0.1%

Re: 3400 controller login issue

Try restarting the controller
Did you removed the IP address of VLAN 1?
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Contributor I

Re: 3400 controller login issue

Actually , found the issue ! 

 

We were authenticating against a radius server instead of internal auth. 

 

THat caused the time lag.

 

Thank you for all your input eveyrone ! 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: