Wireless Access

Reply
Occasional Contributor II

3600 as a Master Capacity

Hi All,
if I am using a 3600 as a central master controller for a large network. How many remote \ local controllers can this supoport?

How is it calculated - total number of APs on the local controller or number of users etc... Thanks for your help.

Aruba Employee

Re: 3600 as a Master Capacity

Hi,

Please refer to the following VRD (Validated Reference Design) on page 112.

 

http://www.arubanetworks.com/pdf/technology/DG_Mobility-Controllers-Deployment-Models-5.0-VRD.pdf

 

The scaling values are shown there.

 

Regards,

Mark

Occasional Contributor II

Re: 3600 as a Master Capacity

Thanks MVERBLOOT, this answers my question exactly.

Have saved the link for future reference too.

Thanks.

 

New Contributor

Re: 3600 as a Master Capacity

 

Hello,

 

i am not able to access above link.

 

i am looking for max. no. of users that 3600 controller can handel at a time.

Aruba

Re: 3600 as a Master Capacity

The 3600 can handle 8192 concurrent devices;  see dataheet:

 

Screen Shot 2014-11-20 at 12.38.24 AM.png

 

http://www.arubanetworks.com/pdf/products/matrix-mobility-controller.pdf

 

 

As a Master, the guides (links) have been since updated.  The numbers below are if the controller is a Master; so the numbers are referrimg to the cumulative nuimbers; including the locals.  

 

Try this:

 

Page 63

http://www.arubanetworks.com/wp-content/uploads/MControllerVRDV9.pdf

 

Screen Shot 2014-11-20 at 12.33.53 AM.png

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: