Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

4 AP's model 105. One of them is unable to broadcast SSID's. HELP

This thread has been viewed 1 times
  • 1.  4 AP's model 105. One of them is unable to broadcast SSID's. HELP

    Posted Sep 04, 2013 01:30 AM

    I have a controller model 620 and 4 AP's model 105. Three AP's are able to broadcast SSID's but one AP is not able to broadcast. However its getting an ip address from the controller. DHCP enabled on the controller

     

    AP GUI status.jpg

     

    Console output of the APis mentioned below. Kindly help me in this regard. 

    ------------------------------------------------------------------------------------------------------

    apboot> purg

    Un-Protected 1 sectors

    .done

    Erased 1 sectors

    Writing

    apboot> save

    Saving Environment to Flash...

    Un-Protected 1 sectors

    .done

    Erased 1 sectors

    Writing

    apboot> boot

    Checking image @ 0xbf100000

    Invalid image format version: 0xffffffff

    eth0 up: 100 Mb/s full duplex

    DHCP broadcast 1

    DHCP IP address: 172.16.0.4

    DHCP subnet mask: 255.255.255.0

    DHCP def gateway: 172.16.0.254

    DHCP DNS server: 8.8.8.8

    DHCP DNS domain:

    Controller address: 172.16.0.254

    Using eth0 device

    TFTP from server 172.16.0.254; our IP address is 172.16.0.4

    Filename 'mips32.ari'.

    Load address: 0x2000000

    Loading: ############T #####################################################

             #######################

    done

    Bytes transferred = 5713900 (572fec hex)

     

    Image is signed; verifying checksum... passed

    Signer Cert OK

    Policy Cert OK

    RSA signature verified.

    Automatic boot of image at addr 0x02000000 ...

    ELF file is 32 bit

    Loading .text @ 0x80e00000 (5645032 bytes)

    Loading .data @ 0x813622f0 (32 bytes)

    Clearing .bss @ 0x81362310 (16 bytes)

    ## Starting application at 0x80e00000 ...

    Uncompressing.....................................................

    ú

    Aruba Networks

    ArubaOS Version 6.2.1.2 (build 38532 / label #38532)

    Built by p4build@cyprus on 2013-05-30 at 17:58:04 PDT (gcc version 4.3.3)

    CPU Rev: aa

    71x CPU

    Flash variant: default

    Cache parity protection disabled

    Using 340.000 MHz high precision timer. cycles_per_jiffy=680000

    Memory: 120960k/131072k available (1920k kernel code, 10036k reserved, 756k data

    , 4740k init, 0k highmem)

     available.

    detected lzma initramfs

    initramfs: LZMA lc=3,lp=0,pb=2,dictSize=8388608,origSize=21280256

    LZMA initramfs by Ming-Ching Tiew <mctiew@yahoo.com> ...........................

    ................................................................................

    ................................................................................

    ................................................................................

    ..........................................................

    AR7100 GPIOC major 0

    wdt: registered with refresh

    Enabling Watchdog

    Talisker RSSI LED initialization

    Creating 1 MTD partitions on "ar7100-nor0":

    0x00000000-0x01000000 : "flash"

    i2c /dev entries driver

    i2c-talisker: using default base 0x18040000

    AD7416 driver probing for devices on AR7100 I2C

    .<6>lo: Disabled Privacy Extensions

    IPv6 over IPv4 tunneling driver

     

    Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT

    Starting Kernel HMAC-SHA1 KAT ...Completed Kernel HMAC-SHA1 KAT

    Starting Kernel DES KAT ...Completed Kernel DES KAT

    Starting Kernel AES KAT ...Completed Kernel AES KAT

     

    Domain Name: arubanetworks.com

    No panic info available

    apfcutil: sector CACHE: Cache uninitialized

    Testing TPM... Passed

    apfcutil: sector RAP: Cache uninitialized

    apfcutil -c RAP: Uninitialized. Initializing.........

    apfcutil: sector MESH Prov: Cache uninitialized

    ag7100_mod: module license 'unspecified' taints kernel.

    AG7100: Length per segment 512

    AG7100: Max segments per packet 4

    AG7100: Max tx descriptor count    400

    AG7100: Max rx descriptor count    252

    AG7100: fifo cfg 3 018001ff

    AG7100CHH: Mac address for unit 0

    AG7100CHH: d8:c7:c8:c2:38:be

    ATHRF1: Port 0, Neg Success

    ATHRF1: unit 0 phy addr 0 ATHRF1: reg0 0

    AP xml model 39, num_radios 2 (jiffies 6533)

    init_asap_mod: installation:0

    radio 0: band 1 ant 0 max_ssid 8

    radio 1: band 0 ant 0 max_ssid 8

    setting bond0 as bridge child

    setting gre0 as split child

    Starting watchdog process...

    Getting an IP address...

    ag7100_ring_alloc Allocated 4800 at 0x86bee000

    ag7100_ring_alloc Allocated 3024 at 0x869e4000

    AG7100: cfg1 0xf cfg2 0x7014

    ATHRF1: Port 0, Neg Success

    ATHRF1: unit 0 phy addr 0 ATHRF1: reg0 3100

    AG7100: unit 0 phy is up...RGMii 100Mbps full duplex

    AG7100: pll reg 0x18050010: 0x1099  AG7100: cfg_1: 0x1ff0000

    AG7100: cfg_2: 0x3ff

    AG7100: cfg_3: 0x18001ff

    AG7100: cfg_4: 0xffff

    AG7100: cfg_5: 0x7ffef

    AG7100: done cfg2 0x7115 ifctl 0x10000 miictrl 0x12

    Writing 4

    172.16.0.4 255.255.255.0 172.16.0.254

    Running ADP...Done. Master is 172.16.0.254

    ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, PRIVATE_DIAG, WRITE_EEPROM, 11D)

     

    ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Right

    s Reserved

    ath_rate_atheros: Aruba Networks Rate Control Algorithm

    ath_dfs: Version 2.0.0

    Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved

    ath_spectrum: Version 2.0.0

    Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved

    ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserve

    d

    ath_pci: 0.9.4.5 (Atheros/multi-bss)

    wifi0: Base BSSID d8:c7:c8:a3:8b:e8, 8 available BSSID(s)

    bond0 address=d8:c7:c8:c2:38:be

    br0 address=d8:c7:c8:c2:38:be

    wifi0: AP type AP-105, radio 0, max_bssids 8

    wifi0: Atheros 9280: mem=0x10010000, irq=49 hw_base=0xb0010000

    wifi1: Base BSSID d8:c7:c8:a3:8b:e0, 8 available BSSID(s)

    bond0 address=d8:c7:c8:c2:38:be

    br0 address=d8:c7:c8:c2:38:be

    wifi1: AP type AP-105, radio 1, max_bssids 8

    wifi1: Atheros 9280: mem=0x10000000, irq=48 hw_base=0xb0000000

    ath_ahb: 0.9.4.5 (Atheros/multi-bss)

     

    Starting FIPS KAT ... Completed FIPS KAT

     

    shutting down watchdog process (nanny will restart it)...

     

            <<<<<       Welcome to the Access Point     >>>>>

     

    ~ # cert_cap=0

     

    BUG: soft lockup detected on CPU#0! stuck for 10002 ms!

    Cpu 0

    $ 0   : 00000000 00805128 00000000 00060100

    $ 4   : 00000006 bf000008 00060100 00000008

    $ 8   : 00060000 ffffffff 00000001 00060100

    $12   : 00060000 00070000 bf00000c 20f3946e

    $16   : 004b0000 0000004c 0000004c 87d026a0

    $20   : 00010000 80360000 87689e74 00000000

    $24   : 00000000 8021d97c

    $28   : 87688000 87689e18 87bf0000 8021da44

    Hi    : 00000000

    Lo    : 0000004b

    epc   : 8021d244 ar7100_spi_poll+0x44/0x8c     Tainted: P

    ra    : 8021da44 ar7100_flash_erase+0xc8/0x164

    Status: 1000d403    KERNEL EXL IE

    Cause : 50808000

    PrId  : 00019374

    Unwound Call Trace:

    [<80114828>] dump_stack+0x8/0x40

    [<80112ae8>] timer_interrupt+0x8c/0x21c

    [<8014e3c4>] handle_IRQ_event+0x5c/0xb8

    [<8014e4d4>] __do_IRQ+0xb4/0x140

    [<8010dc0c>] do_IRQ+0x1c/0x34

    [<8010292c>] ar7100_interrupt_receive+0xec/0x100

     



  • 2.  RE: 4 AP's model 105. One of them is unable to broadcast SSID's. HELP

    EMPLOYEE
    Posted Sep 04, 2013 07:15 AM

    Please open a case for these matters.  That is your best bet.